0 Guests are online
Total Listings: 901

Categories

welcome!

Register an Account or

What would you like to do?

Sale/Auction: IMO 324-400P Rotary Positive Displacement 3 Screw Pump (Unused)

Send an email to sales@papermillsurplus.com to inquire about this item.

Make/Model:

 Imo  Series 324

Description:

 IMO TAK324NZ-400P Rotary Positive Displacement 3 Screw Pump (Rebuilt)

 

Series T324

The T324 series is a double suction design for a compact, medium flow, medium pressure pump.  It is used extensively for crude oil processing and transport as well as for fuel oil services.


T324

SERIES


Nominal flow rate, GPM/LPM, at 700 PSI (48 BAR), 200 SSU (43 CST)

SPEED RPM

Size

1750

1450

1150

960

870

400P


598/2265


480/1816


361/1367


286/1083


250/948

400


757/2864


609/2303


460/1742


366/1387


322/1219

Series T324 Specifications

Casing-   High shock capacity ductile (nodular) iron.

Rotor Housing-   Bronze standard, bimetal optional.

Power Rotor-   Alloy steel, hardened and thread ground.

Idler Rotors-   Alloy steel, hardened and thread ground.

Gaskets-   Cellulose and non-asbestos fiber.

Seal & Bearing-   Type B: Buna N bellows mechanical seal with carbon on niresist faces. Recommended for distillate oils.  Type ZT: Positive drive mechanical seal with carbon on carbide faces. Recommended for residual and crude oils. All types have one external, permanently grease packed, deep groove ball bearing.

Accessories- Completely mounted, built to order pump/driver assemblies are available with baseplates, etc.

Outlet Pressure-   700 PSIG (48.3 BAR) maximum.

Inlet Pressure-   65PSIG (4.5 BAR) maximum. Designs available to 400 PSIG (27.6 BAR). 50 PSIG (3.4 BAR) maximum for pumps with double shaft extensions.

Viscosity-   Type B: 33 to 3000 SSU (2.0 to 650 CST). Consider cold startup conditions. Type ZT: 33 to 20,000 SSU (2.0 to 4300 CST).

Temperature-   Type B: 0 to 180°F (-18 to 82°C). Type ZT: 0 to 250°F (-18 to 121°C)

Drive-  Direct only.

Rotation-  Clockwise facing pump shaft.

Mounting-  Horizontal foot mount.

Filtration- Inlet strainers are required to keep contaminants and abrasives out of the pump. They must be selected in consultation with the strainer vendor to prevent pump starvation. Normally, 60 mesh (0.01 inch- 238 micron) for light and 1/8-3/16 inch (3-5mm) openings for heavy oils are recommended.

Maximum Speed*-   2300 RPM. Speeds above 1800 RPM require Imo Pump review.

* Assumes minimum inlet pressure requirements are met

Video Not Available

©2007 Paper Mill Surplus