6 Guests are online
Total Listings: 1116

Categories

welcome!

Register an Account or

What would you like to do?

Sale/Auction: Complete Paper Mill Consignment for MD Papeis

Send an email to sales@papermillsurplus.com to inquire about this item.

Make/Model:

 Voith Brochure

Description:

 
 
 
 
 
 
 
 
 
Paper Mill Surplus and GEASA Ltda Brasil are pleased to announce the that we have been awarded an exclusive consignment contract to sell MD Papeis Cubatao Paper Mill located Cubatao Brasil. We are working with AVP LLC. as our exclusive consultant.
 
This is a major liquidation consisting of 3 paper machines, a big array of finishing equipment, Effluent, a Metso Biologic treatment facility, boilers,  transformers, electrical, lab equipment, pumps, motors and spares.

The mill produced 61,000 tonnes/yr printing/writing and monolucid paper capacity. We need to sell each machine as an entire line, we will not be parting out the machines.

Here is the Major Machinery:

PAPER MACHINES

 
PAPER MACHINE PRODUCTION LINE # 1:
 
Nominal Production:                                               1200 tons / month
Average Production (2010 / 2011)                        1174 / 1222 tons /month
Trim                                                                            2030 mm
Speed Range                                                           175 to 320 m/min
Drive Speed (max)                                                   380 m/min
Headbox Speed Design                                         550 m/min
Drive spec.                                                                Line Shaft (single motor) 320hp / 1300 rpm / cc
Basis weight                                                             56 to 90 g/m²
Main Products                                                        Off Set / Off set + Pigment / Color Papers
 
 
Stock Preparation Line # 1:
 
Disaggregation:
 
-        MAIN HYDRAPULPER  : 20 m³
-        CONVEYOR with motor
-        PUMPS AND MOTORS
-        SPARE HYDRAPULPER  : 12 m³
-        PUMPS AND MOTORS
 
 
Refining:
 
Quantity:                                  3 refiners
 
-        1 Unit PILAO  MODEL RTC 1000  - 300 hp
-        2 Units PILAO  MODEL RTD 500 – 300 hp  (each)
-        Serial disposal with 04 ways valves
-        Total Power:                900 hp
 
 



 
Cleaners:
 
Supplier:                                VOITH
Model:                                    KS 160/6R-DG
Capacity:                               600 l/min – each
Year:                                       1991
Stages:                                   3                               
 
-        1st  Stage :  20 CLEANERS
-        2nd Stage :  7 CLEANERS
-        3rd  Stage : 1 CLEANER REJECTOMAT
 
 
Approach Flow System:
 
Fan Pump                                          SULZER
Model                                                 SM-X-300 
Flow                                                    9.000 l/min
 
 
Pressure Vertical Screen                VOITH  Size 10
Capacity:                                           15240 l/min  
Slots
Year 2003
 
 
Paper Machine Line #1:
 
 
Headbox:
 
Supplier:                                            VOITH
Model:                                                MASTERJET II – FL 25/2 B
Slice width:                                        2306 mm
Year:                                                   2003
 
 
Fourdrinier:
 
Wire width                                        2400mm
Wire perimeter                                24950 mm
Breast roll diameter                        400 mm
Couch Roll diameter                       680 mm   (Year 1972)
Lampbreaker diameter                   490 mm
With Shake System
Year:   1965



Press Section:
 
Felt Width:                                         2250 mm
Year:                                                   1972
 
1st  PRESS  - Bottom felted
Suction bottom roll                           560 mm diameter
Top roll                                               500 mm diameter
Linear Pressure:                              50 kg/cm
 
2nd  PRESS  - Bottom felted
Bottom roll                                         560 mm diameter
Top roll                                               500 mm diameter
Linear Pressure:                              75 kg/cm
 
OFF SET PRESS
Bottom roll                                         410 mm diameter
Top roll                                               380 mm diameter
Linear Pressure:                              35 kg/cm
 
 
Dryer Section:
 
Groups:                                              3
Supplier:                                            VOITH
Face width:                                        2250mm
Diameter:                                          1500mm
Drive:                                                 open gear
Steam Pressure:                              4 kgf/cm2
 
Pre dryer section:                            11 dryer cans top and bottom felted  (year 1984) 
 
Yankee dryer                                    Diameter: 3600 mm ( year 1972)
 
Press roll                                          Diameter 420 mm (nip with Yankee)
 
After dryer section:                         6 dryer cans top and bottom felted  (year 1991)
 
Size press                                       flooded nip (year 1991): 
Rolls diameter:                                560 mm /  535 mm
Linear pressure:                              45 kg/cm
 
Cooler cylinder diameter                1100 mm
 



 
Calender:
 
NIP’s:                                                2
Face rolls width:                              2150mm
Top Roll diameter:                           355mm
Central Roll Diameter:                    450mm            
Bottom Roll Diameter:                     355mm
 
Top and bottom roll with deflection compensating system
Top nip linear pressure:                  45 kg/cm
Bottom nip linear pressure:            30 kg/cm
Year:                                                  1984
 
 
Scanner Honeywell
 
Model:                                                NER 586 M
Emitter:                                              KR-85
Output data:                                      basis weight profile; moisture profile; thickness
and ash contents.
 
 
Reel:
 
Model:                                           POP 762
Drum diameter                             762 mm
Jumbo roll diameter                     1100 mm
Drum with cooling device
Local crane :                                 2000 kg
 
 
Vacuum System:
 
5 Units Vacuum Pump:                  NASH  -  Model: CL 1000
1 Unit  Vacuum Pump:                   NASH  -  Model: CL 2000
Set of Separators
 
 
Winder Line # 1:
 
Supplier:                                            Jagenberg - Werke
Model:                                                26-12
Width:                                                2600mm
Inlet Diameter (Max.):                      1500mm
Outlet Diameter (Max):                    1270mm
Speed (Max):                                    1200 m/min
Local Crane:                                     1600 kg
Production:                                        50 t/day
Year:                                                   1958
Has had rebuilds



Electric Transformers Line # 1:
 
02 Units:
 
Supplier:                                          MAG
Year:                                                 2007
Input/output:                                     13,8 Kv / 453 v
Power:                                             1500 Kva
Oil
 
Supplier:                                            Induselet
Input/output:                                       13,8 Kv / 440 v
Power:                                               1500 Kva
Oil
 
 
Major Spare Components Line # 1:
 
 
-        Dryer Can (2 Un)
-        Main Motor 324 Kw
-        Size Press Rolls (set)
-        Calender Central Roll
-        Yankee Press Roll
-        Suction Roll Shell (for 1st Press)
-        Transformer 1500 Kva
 
 
Major Spare Consumption Materials Line # 1:
 
 
-        Yankee Felt 6,2 x 2,3 m
-        1st  Press Felt 11,3 x 2,3 m ( 2Un)
-        2nd  Press Felt 10,5 x 2,3 m ( 3 Un)
-        Fourdrinier Wire 24,95 x 2,4m
-        Bottom Felt 1st  Dryer Group 21,6 x 2,3 m (2 Un)
-        Top Felt 1st  Dryer Group 21,6 x 2,3 m
-        Bottom Felt 2nd  Dryer Group 27 x 2,3 m
-        Top Felt 2nd  Dryer Group 16,5 x 2,3 m (3 Un)
-        Bottom Felt 3rd  Dryer Group 18,4 x 2,3 m (2Un)
-        Top Felt 3rd  Dryer Group 18,4 x 2,3 m
-        Yankee Felt18,4 x 2,3 m (2Un)
-        Cooler Dryer Felt 6,2 x 2,3 m (2 Un)



PAPER MACHINE PRODUCTION LINE # 3:
 
Nominal Production:                                               2000 tons / month
Average Production (2010 / 2011)                        1943 / 1886 tons /month
Trim                                                                            2030 mm
Speed Range                                                           140 to 380 m/min
Drive Speed (max)                                                   420 m/min
Headbox Speed Design                                         550 m/min
Drive spec.                                                                Line Shaft (single motor) 410hp / 1340 rpm / cc
Basis weight                                                             56 to 290 g/m²

Main Products                                                        
Off Set / Off White / White Board / Eco Paper (recycled) / Color Papers
 
 
Stock Preparation Line # 3:
 
Disaggregation:
 
-        MAIN HYDRAPULPER  : 20 m³
-        CONVEYOR with motor
-        PUMPS AND MOTORS
-        SPARE HYDRAPULPER  : 12 m³
-        PUMPS AND MOTORS
 
 
Refining:
 
Quantity:                                  3 refiners
 
-        1 Unit PILAO  MODEL RTC 2000  - 450 hp (Year 2003)
-        1 Unit PILAO  MODEL RTD 500 – 300 hp 
-        1 Unit PILAO  MODEL DD 3000 – 300 hp 
-        Serial disposal with 04 ways valves
-        Total Power:                1050 hp
 
 



 
Cleaners:
 
Supplier:                                            VOITH
Model:                                                KS 160/6R-DG
Capacity:                                           600 l/min – each
Year:                                                   2002
Stages:                                              3                               
 
-        1st  Stage :  18 CLEANERS
-        2nd Stage :  6 CLEANERS
-        3rd  Stage : 2 CLEANERS REJECTOMAT
 
 
Approach Flow System:
 
Fan Pump                                         SULZER
Model                                                 SML 12-400 
Flow                                                   15.000 l/min
 
 
Pressure Vertical Screen               VOITH  Size 10
Capacity:                                          15240 l/min  
Slots
Year 2003
 
 
Paper Machine Line # 3:
 
 
Headbox:
 
Supplier:                                            VOITH
Model:                                                MASTERJET II – FL 25/2 B
Slice width:                                        2306 mm
Year:                                                   2002
 
 
Fourdrinier:
 
Wire width                                        2400mm
Wire perimeter                                24950 mm
Breast roll diameter                        430 mm
Couch Roll diameter                       680 mm   (Year 1972)
Lampbreaker diameter                  445 mm
Dandy Roll diameter                       800 mm
With Shake System
Year:   1972



Press Section:
 
Felt Width:                                         2250 mm
Year:                                                   1969 / 1993
 
1st   PRESS  - Bottom felted
Suction bottom roll                           610 mm diameter
Top roll                                               530 mm diameter
Linear Pressure:                              45 kg/cm
 
2nd   PRESS  - Bottom felted
Bottom roll                                         560 mm diameter
Top roll                                               530 mm diameter
Linear Pressure:                              55 kg/cm
 
3rd  PRESS  - Top felted
Bottom roll                                         500 mm diameter
Top roll                                               560 mm diameter
Linear Pressure:                              80 kg/cm
 
OFF SET PRESS
Bottom roll                                         410 mm diameter
Top roll                                               380 mm diameter
Linear Pressure:                              35 kg/cm
 
 
Dryer Section:
 
Groups:                                              3
Supplier:                                            Thiry Huyl / CFF
Face width:                                       2250mm
Diameter:                                          1500mm
Drive:                                                  open gear
Steam Pressure:                               4 kgf/cm2
Steam Fit / Joints                              Johnson
 
Pre-dryer section:                             16 dryer cans top and bottom felted  (year 1992) 
 
After-dryer section:                            8 dryer cans top and bottom felted  (year 1970 / 2008)
 
Size press                                         flooded nip (year 1969): 
Rolls diameter:                                  435 mm /  435 mm
Linear pressure:                                25 kg/cm
 
Cooler cylinder diameter                 1500 mm
 



 
Calender:
 
NIP’s:                                                4  (02 on Machine and 02 not installed)
Face rolls width:                              2150mm
Top Roll diameter:                           355mm
Central Roll Diameter:                    450mm            
Bottom Roll Diameter:                    355mm
 
Top and bottom roll with deflection compensating system
Top nip linear pressure:                  45 kg/cm
Bottom nip linear pressure:            30 kg/cm
Year:                                                  1972
 
 
Scanner Honeywell
 
Model:                                                NER 586 M
Emitter:                                               KR-85
Output data:                                       basis weight profile; moisture profile; thickness
 and ash contents.
Automatic Control:                            basis weight profile; moisture profile
 
 
Reel:
 
Model:                                                POP 762
Drum diameter                                  762 mm
Jumbo roll diameter                          1100 mm
Drum with cooling device
Local crane :                                      2000 kg
Year:                                                   1993
 
 
Vacuum System:
 
1 Units Vacuum Pump:                  NASH  -  Model: CL 1000
4 Unit  Vacuum Pump:                   NASH  -  Model: CL 2000
Set of Separators
 
 
Winder Line # 3:
 
Supplier:                                            Jagenberg
Model:                                                Varidur
Width:                                                 2200mm
Inlet Diameter (Max.):                      1500mm
Outlet Diameter (Max):                    1270mm
Speed (Max):                                    1200 m/min
Local Crane:                                     1800 kg
Production:                                        100 t/day
Year:                                                   1977



Electric Transformer Line # 3:
 
 
Supplier:                                            WEG
Year:                                                   2005
Input/output:                                       13,8 Kv / 440 v
Power:                                                3000 Kva
Oil
 
 
 
Major Spare Components Line # 3:
 
 
-        Dryer Can (2 Units – 01 NEW)
-        Main Motor 301 Kw
-        Refiner RTD 500
-        Fan Pump
-        Top lip for headbox + internal blade
-        Breast Roll
-        Couch Roll Shell (drilled)
-        01 Suction Press Roll – 1st  nip
-        01 Top Roll  - 1st Press
-        2nd Press Rolls (top and bottom)
-        3rd Press Rolls (top and bottom)
-        Off Set Press Rolls (02 units)
-        Size Press Rolls (set)
-        Calender Rolls (set of 05 Rolls)
 
 
Major Spare Consumption Materials Line # 3:
 
 
-        1st Press Felt 10,5 x 2,3 m
-        2nd Press Felt 9,7 x 2,3 m (2 Un)
-        3rd Press Felt 10,5 x 2,3 m (2 Un)
-        Fourdrinier Wire 24,95 x 2,4m
-        Top Felt 1st  Dryer Group 27 x 2,2 m (2 Un)
-        Bottom Felt 2nd  Dryer Group 27 x 2,2 m
-        Top Felt 2nd  Dryer Group 27 x 2,2 m
-        Bottom Felt 3rd  Dryer Group 27 x 2,3 m (2 Un)
-        Top Felt 3rd  Dryer Group 27 x 2,3 m (2 Un)
-        Cooler Dryer Felt 7,6 x 2,3 m (2 Un)



PAPER MACHINE PRODUCTION LINE # 4:
 
Nominal Production:                                               1600 tons / month
Average Production (2010 / 2011)                        1400 / 1404 tons /month
Trim                                                                            2430 mm
Speed Range                                                           75 to 350 m/min
Drive Speed (max)                                                   400 m/min
Headbox Speed Design                                         500 m/min
Drive spec.                                                                Line Shaft (single motor) 410hp / 1300 rpm / cc
Basis weight                                                             40 to 210 g/m²
Main Products                                                          Special Papers / Color Papers
 
 
Stock Preparation Line # 4:
 
Disaggregation:
 
-        MAIN HYDRAPULPER  : 12 m³
-        CONVEYOR with motor
-        PUMPS AND MOTORS
-        SPARE HYDRAPULPER  : 12 m³
-        PUMPS AND MOTORS
 
 
Refining:
 
Quantity:                                  3 refiners
 
-        1 Unit PILAO  MODEL RTC 2000  - 450 hp (Year 2004)
-        2 Units PILAO  MODEL DD 3000 – 300 hp  (each)
-        Serial disposal with 04 ways valves
-        Total Power:                1050 hp
 
 



 
Cleaners:
 
Supplier:                                VOITH
Model:                                    KS 160/6R-DG
Capacity:                               600 l/min – each
Year:                                       2004
Stages:                                   3                               
 
-        1st  Stage :  24 CLEANERS
-        2nd Stage :  8 CLEANERS
-        3rd  Stage : 1 CLEANER REJECTOMAT
 
 
Approach Flow System:
 
Fan Pump                                         VOITH
Model                                                 DG 30/50 
Flow                                                   20.000 l/min
 
 
Pressure Vertical Screen               VOITH  Size 10
Capacity:                                          15240 l/min  
Slots
Year 1986
 
 
Paper Machine Line # 4:
 
 
Headbox:
 
Supplier:                                            VOITH
Model:                                                MASTERJET II
Slice width:                                        2606 mm
Year:                                                   2004
 
 
Fourdrinier:
 
Wire width                                         2750mm
Wire perimeter                                 23900 mm
Breast roll diameter                         572 mm
Couch Roll diameter                       800 mm   
Lampbreaker diameter                  550 mm
With Shake System
Year:   1963 / Rebuilt in 2011



Press Section:
 
Felt Width:                                         2800 mm
Year:                                                   1963 / 1980
 
1st  PRESS  - Bottom felted
Suction bottom roll                           700 mm diameter
Top roll                                               525 mm diameter
Linear Pressure:                              35 kg/cm
 
2nd  PRESS  - Bottom felted
Bottom roll                                         550 mm diameter
Top roll                                               660 mm diameter
Linear Pressure:                              45 kg/cm
 
OFF SET PRESS
Bottom roll                                         500 mm diameter
Top roll                                               550 mm diameter
Linear Pressure:                              25 kg/cm
 
 
Dryer Section:
 
Groups:                                              3
Supplier:                                            Escher Wyss / CFF
Face width:                                       2790mm
Diameter:                                         1500mm
Drive:                                                open gear
Steam Pressure:                             4 kgf/cm2
 
Pre-dryer section:                           11 dryer cans top and bottom felted
 
Yankee dryer                                    Diameter: 4200 mm
 
Press roll                                          Diameter 500 mm (nip with yankee) at 80 kg/cm
 
After dryer section:                         4 dryer cans top and bottom felted 
 
Felt Dryers:                                     7 dryer cans – can be used as effective dryers 
 
Cooler cylinder diameter              1500 mm
 



 
Calender:
 
NIP’s:                                                 2
Face rolls width:                               2600 mm
Top Roll diameter:                            380 mm
Central Roll Diameter:                     500 mm            
Bottom Roll Diameter:                     380 mm
 
Top and bottom roll with deflection compensating system
Top nip linear pressure:                  110 kg/cm
Bottom nip linear pressure:            40 kg/cm
Year:                                                  1985
 
 
Scanner ABB
 
Model:                                                ACCURAY STLK 11 – TG4BA-98
Emitter:                                              Cryptonym - 85
Output data:                                      basis weight profile; moisture profile
Automatic Control:                           basis weight profile; moisture profile
 
 
Reel:
 
Model:                                              POP 1000
Drum diameter                               1000 mm
Jumbo roll diameter                       1200 mm
Drum with cooling device
Local crane :                                   2700 kg
Year:                                                 1963 / Rebuild 2010
 
 
Vacuum System:
 
3 Units Vacuum Pump:                  NASH  -  Model: CL 1000
2 Units  Vacuum Pump:                 NASH  -  Model: CL 2000
Set of Separators
 
 
Winder Line # 4:
 
Supplier:                                            Jagenberg
Model:                                                Varidur 33-12
Width:                                                 2600mm
Inlet Diameter (Max.):                      1500mm
Outlet Diameter (Max):                    1270mm
Speed (Max):                                    1200 m/min
Local Crane:                                      2700 kg
Production:                                        80 t/day
Year:                                                   1981 / 2010



Electric Transformers Line # 4:
 
02 Units:
 
Supplier:                                             Induselet
Year:                                                   2007
Input/output:                                       13,8 Kv / 440 v
Power:                                                1500 Kva
Oil
 
Supplier:                                            Induselet
Input/output:                                       13,8 Kv / 440 v
Power:                                               1500 Kva
Oil
 
 
Major Spare Components Line # 4:
 
 
-        Dryer Can
-        Top lip for headbox + internal blade
-        Fan Pump
-        Refiner DD 3000
-        1st Press Suction Roll Shell (drilled)
-        2nd Press Rolls (02 units)
-        Off Set Press Rolls (02 units)
-        Calender Central Roll
-        Yankee Press Roll
-        Transformer 1250 Kva  and 2000 Kva
 
 
Major Spare Consumption Materials Line # 4:
 
 
-        Yankee Felt 7,2 x 2,8 m (2 Un)
-        1st  Press Felt 12,6 x 2,8 m
-        2nd  Press Felt 12,6 x 2,8 m
-        Fourdrinier Wire 22,9 x 2,8m (2 Un)
-        Bottom Felt 1st  Dryer Group 26,5 x 2,75 m (2 Un)
-        Top Felt 1st  Dryer Group 26,5 x 2,75 m (2 Un)
-        Bottom Felt 2nd  Dryer Group 30 x 2,75 m (3 Un)
-        Top Felt 2nd Dryer Group 21,5 x 2,75 m
-        Bottom Felt 3rd  Dryer Group 21,5 x 2,75 m
-        Top Felt 3rd  Dryer Group 21,5 x 2,75 m
-        Yankee Felt 30,6 x 2,75 m (2Un)
-        Cooler Dryer Felt 11,5 x 2,75 m (2 Un)

FINISHING EQUIPMENT

SHEETER # 1:
 
Supplier:                                                        Strecker / Bruderhaus
Model:                                                            Duplex
Capacity:                                                       600 g/m²
Trim                                                                2360 mm
Cut Length                                                    1800 mm
Nominal Speed                                            150 m/min
Inlet Diameter (Max.):                                   1000 mm
Year:                                                               1958
 
 
SHEETER # 2:
 
Supplier:                                                                   Jagenberg Werke
Model:                                                                       Convo 14
Capacity:                                                                  15 t / day
Year:                                                                          1975
 
 
SHEETER # 4:
 
Supplier:                                                                    Jagenberg
Model:                                                                        Convo
Capacity:                                                                   450 g/m²
Trim                                                                            1600 mm
Cut Length                                                                 1600 mm
Nominal Speed                                                         300 m/min
Inlet Diameter (Max.):                                               1500 mm
Automation Siemens                                                Simatic S7 200 / CPU 216-2  I/O – EM235
Year:                                                                            1971 (Start-up 2000)
 
 



 
Embosser # 1 (Gofradeira)
 
Supplier:                                                                    Dornbusch
Trim                                                                            1200 mm
Nominal Speed                                                         60 m/min
Year:                                                                           1976
 
 
Embosser # 2 (Gofradeira)
 
Supplier:                                                                   Dornbusch
Trim                                                                           1000 mm
Nominal Speed                                                        100 m/min
Year:                                                                           2001
 
 
Flexographic
 
Supplier:                                                                    Drucken-Flex
Model:                                                                        IFD 2100/2
Trim                                                                            2100 mm
Printing Length                                                         300 to 1180 mm
Nominal Speed                                                        150 m/min
Colors                                                                        2x0 or 1x1
Year:                                                                           2003
 
 
Wrapper:
 
Supplier:                                                                   Wrappmatic
Width Cut Sizes (Ream)                                        420 to 920 mm
Length Cut Sizes (ream)                                        530 to 1300 mm
Height Cut Sizes (Ream)                                       18 to 180 mm
Nominal Speed                                                        05 ream / min
Pallets                                                                       02 units (exit – manual film stretching)
Basis weight                                                             50 to 400 g/m²
Ream weight                                                            40 kg (max)
Automation Siemens                                               PLC Siemens S7-315-2DP-2004
Year:                                                                           upgrade 2004
 
 
Jumbo Stretcher:
 
Supplier:                                                                    MJ MAILLIS
Model:                                                                        WSMH - CRW
Capacity:                                                                   80 t/day – 190 jumbos / day
Jumbo Diameter                                                       2030 mm
Automation Siemens                                               Simatic S7 200 / CPU 222
Year:                                                                           2010



Inlet Water Filters:
 
 
Pressurized Sand Filters                                        05 units
Volume                                                                      21,63 m³ effective volume / each unit
Operating Pressure                                                 2,2 kgf/cm² (max)
External Dimensions                                               3.160 mm diameter X 7.100 mm length
 
 
Boiler # 1:
 
Supplier:                                                                    CBC
Model:                                                                        Compact – 16 VPC-10W – Category B
Capacity:                                                                   22 tons / hour
Working Pressure (max)                                         15 kgf/cm²
Heating Surface                                                       490 m²
Automation                                                               CPU MODCELL – Multiloop ABB
Burner Control / Level Control                                ABB – MOD30ML
Fuel                                                                           Oil / gas
Year:                                                                          1980 / upgrade 2003
 
Boiler # 2:
 
Supplier:                                                                    CBC
Model:                                                                       Compact
Capacity:                                                                   30 tons / hour
Working Pressure (max)                                         10 kgf/cm²
Design Pressure                                                      12 kgf/cm²
Heating Surface                                                       450 m²
Burning Camera volume                                         32,3 m³
Automation                                                               CLP Versamax Rockwell / Versapro Software
Fuel                                                                           Oil / gas
Year:                                                                          2001
 
Water Treatment - Demineralization:
 
Supplier:                                                                    CBC
Model:                                                                        Cationic / Anionic purifier
Capacity:                                                                   15 m³ / h
Air Injection System
Sveen Tank                                     
Year:                                                                           1981
 



Screw Press Dehydrator # 1:
 
Supplier:                                                                    Netzsch
Model:                                                                        Contipress 0805
Capacity:                                                                   10 m³ / hour
Outlet Dryness                                                          48 to 56 %
Automation                                                                CLP Rockwell
Year:                                                                           2002
 
 
Screw Press Dehydrator # 2:
 
Supplier:                                                                     Netzsch
Model:                                                                        Contipress 0505
Capacity:                                                                   500 kg / hour
Outlet Dryness                                                          48 to 56 %
Automation                                                               CLP Rockwell
Year:                                                                          2004
 
 
Biologic Treatment:
 
Supplier:                                                                    Metso
02 Bio-reactors:                                                        floodbed (civil tanks)
Capacity:                                                                   330 m³ each
 
Micro-flotation cell                                                    Optidaf B 56 (ss tank)
Capacity:                                                                   325 m³/ h
Compact air injectors                                               02 units
Year:                                                                           2006
 
 
Jet Cooker
 
Supplier:                                                                   THESI
Capacity:                                                                  11 to 140 kg/h of solids
Automatic batch system                                         
Water tank                                                                3000 liters
Dilution tank                                                             3350 liters
Storage tank                                                             6700 liters
Feeding platform
Steam unit for cooking                                           
Pumps, valves and instruments
Year:                                                                           2008
 



Off Machine Winder # 5
 
Supplier:                                            Jagenberg
Model:                                                23-10
Width:                                                 2200mm
Inlet Diameter (Max.):                      1200mm
Outlet Diameter (Max):                    1000mm
Speed (Max):                                    800 m/min
Local Crane:                                     1500 kg
Year:                                                   1975
 
 
Electric Transformers:
 
05 Units:
 
Supplier:                                            ASEA (ABB)
Input/output:                                       13,2 Kv / 230-133 v
Power:                                               150 Kva
Oil
 
Supplier:                                            ASEA (ABB)
Input/output:                                       13,2 Kv / 230-133 v
Power:                                               125 Kva
Oil
 
Supplier:                                            WALTEC
Year:                                                   2001
Input/output:                                       13,8 Kv  (6x600) / 220-127 v
Power:                                                500 Kva
Dry
 
Supplier:                                            ITEL
Year:                                                  1973
Input/output:                                      13,2 Kv / 220-127 v
Power:                                            300 Kva
Oil
 
Supplier:                                           INDULSET
Input/output:                                     13,8 Kv / 440 v
Power:                                             1000 Kva
Oil
 
 



Dust Removal System - Filters
 
 
Supplier:                                                                    ENVITECH
Capacity:                                                                   33.000 m³ of air
Working Pressure                                                    0,2 mca
Blowers                                                                     06 units with individual dampers
Capacity of 9300 m³/h (each)
Filters                                                                        12 units Diameter 900 mm x 4000 mm
Ducts and supports
Year:                                                                          2006
 
 
Rolls Guillotine
 
Roll Diameter (max)                                               1200 mm
Roll Length (max)                                                    1400 mm
Year:                                                                         1990
 
 
Ream Guillotine
 
Supplier:                                                                    Polar Mohr
Model:                                                                       115 EL
Height (max)                                                             140 mm
Length (max)                                                             1140 mm
 
 
Hydraulic Press for Trim
 
Supplier:                                                                    Jabert / Trimag
Capacity:                                                                   15 to 22 tons
Model                                                                         1000 x 500 mm
06 units                                                                     
 
 
Maintenance Shop Equipment
 
Lathe            
Supplier:                                                                    Romi
Capacity:                                                                   Diameter 600 x length 2500 mm
 
Lathe            
Supplier:                                                                    Romi  model SD-408
Capacity:                                                                   Diameter 800 x length 4000 mm
Year:                                                                          1980
 
Lathe            
Supplier:                                                                    Imor
Capacity:                                                                   Diameter 800 x length 4000 mm
 



Lathe            
Supplier:                                                                    Giessen
Capacity:                                                                   Diameter 1700 x length 5000 mm
Year:                                                                          1952
 
 
 
Universal Machining        
Supplier:                                                                     Romi – model u-30
Capacity:                                                                    table 1200 mmecnica lab Paper Former,
Year:                                                                           1980
 
 
Hydraulic Press     
Capacity:                                                                   100 tons
Width                                                                          900 mm
Height                                                                         900 mm
 
Drilling Machines
 
Cutters
 
Wood-working tools

LAB:

Porosimeter, Mullen Tester-MTA-1000, Palas MFP Measurement Durability Filter, Regmed MFP 2000 Thickness Gauge, Gehaka GS200UV  Water Purification, Regmed DI500 Dynamometer, Microscopes, Regmed INCIN Incinerator, Mecatecnica Paper Former, Regmed DF150/184-60 Pulp Shakers, Regmed CF/A Freeness Tester, Regmed 2G-15 Guillotine, Elrepho 3000 color, Regmed Micrometers, Mullen Testers, Elmendorf, Porosimeters, Sartorious Moisture Analyzers, Heater, Muffle, Oxymeter, turbometer, spectrophotometer, ph meters, balances and much more, full lab.

There are also over 100 motors, over 50 pumps.

Please contact Me with all inquiries.

Best Regards,

Michael Kauffman
Paper Mill Surplus
(612) 850-5936
www.papermillsurplus.com

www.surplusport.com

Video Not Available

©2007 Paper Mill Surplus